Sugar Grinder
A. Application:
The machine is used to granule (crystal) sugar to make it in powder form for using in biscuit recipe.

B. Design:
Hammer Mill type, body of the machine is fitted on a sheet metal box/container/receiver with one air exhaust balloon. The driving motor is fitted on the top of the box. In case of auto feeding a bucket elevator is fitted at one end of the box.

C. Output:
10 Kg/min. (icing sugar)

D. Feeding:
Automatic

E. Power Load:
5 HP for grinder, 1 HP for auto feeder with built-in control panel

Dough Mixer
A. Application:
The machine is used for mixing various ingredients such as flour, sugar, fat, water, and other chemicals for making hard, soft or fermented dough for making biscuits.

B. Design:
A base plate over which two side frames are fitted for taking the load of mixing chamber which is fitted on side frames. In the mixing chamber two Z/sigma type-mixing blades are fitted which rotate at different speeds in opposite direction to mix various types of soft/hard dough for achieving required glutton of dough. An electrically operated tilting device is also fitted to tilt mixing chamber to unload mixed dough. The machine is covered from all sides to avoid dust and accidents etc.

C. Capacity:
100 Kg. Flour, 200 Kg. Flour, 300 Kg. Flour per batch.

D. Contact parts:
In standard model all contact parts are made in mile sheet/ cast iron but the top lid in S.S.-304. However all contact parts can be supplied in S.S.-304.

E. Leakage protection:
The mixing bowl is protected by double oil seals with gland rope in all four shafts of blades to avoid leakage of liquids from the mixing chamber.

F. Power load:
10HP & 1 HP, 20HP & 2HP, 30 HP & 3 HP respectively.

Rotary Moulder
The dough to be moulded is fed into the hopper and a forcing roller forces the dough into the cavities of the moulding roller made out of gun metal, uniformly engraved and coated with food grade Teflon. Excess dough is cleared with a knife, which is held by a holder made from tool steel, to ensure uniform filling.

An adjustable rubber roller conveying the discharge cotton web, presses it uniformly against the moulding roller for perfect transfer of molded pieces from the moulding roller on to the web.

The purpose of three drives is, speed of the forcing roller influences the density of dough forced in to the moulding cavity. The speed of the die roller influences the production speed. The discharge web speed influences the shape of the biscuits produced along the web or across the web.

Rotary Cutter
Application:
The single head rotary cutter prints fine design on a continuously fed dough sheet and also cuts out the individual dough piece.

Operation
The unit powered by 1.5KW helical geared motor and speed controlled by AC frequency controller. Drive is given to cutting roller only to accommodate different sizes of die's in this machine.

Rubber lined anvil roller is adjustable in height so that pressure can be controlled at both sides in parallel or independently. The anvil roll is being driven by friction of the cutting web, which is independently powered by its own separate drive. For safety reasons the cutting roll is provided with guard, removal of which stops the motor.